Typical Applications

Residential/Commercial

Entrance and Internal Doors

Features

  • 4mm Tapered Leaf Hinge
  • Provides strength for commercial applications
  • Prevents hinge bind
  • Eliminates rebating of doors and jambs
  • Offset knuckle, raised to allow flexibility of hinge position on door jamb
  • Pre-drilled and countersunk
  • Designed, manufactured and tested in New Zealand

Pack Size

12 Hinges

Finishes

Available in the following finish types:

Quick Fix Hinge Satin Silver (20701)
QF7 Hinge schematic
QF7 hinge end view

Stainless Steel Pin – Finishes

QF7 Hinge Black Powder coated (20600)
QF7 Hinge Black Powder coated (20600)
QF7 Hinge White Powder Coated (20650)
QF7 Hinge White Powder Coated (20650)
QF7 Hinge Satin Silver Anodised (20700)
QF7 Hinge Satin Silver Anodised (20700)
QF7 Hinge Custom colour (20670)
QF7 Hinge Custom colour (20670)

Mild Steel Pin Finishes

QF7 Hinge Black Powder coated (20601)
QF7 Hinge Black Powder coated (20601)
QF7 Hinge Satin Silver Anodised (20701)
QF7 Hinge Satin Silver Anodised (20701)
QF7 Hinge Custom colour (20671)
QF7 Hinge Custom colour (20671)
QF7 Hinge Bright & Polished Silver (20750)
QF7 Hinge Bright & Polished Silver (20750)
QF7 Hinge Bright & Polished Gold (20800)
QF7 Hinge Bright & Polished Gold (20800)

Mild Steel Pin – Variant

QF7 Hinge Rumbled & Unassembled (20301)
QF7 Hinge Rumbled & Unassembled (20301)

Materials of Construction

Hinge extrusion – Aluminium alloy 6261 T5
Bushes & end caps – Nylon 66
Pin – 3/16″ stainless steel 303
Pin – 3/16″ mild steel

Structural Characteristics

Aluminium extrusion has been used for its strength and corrosive resistance. Nylon bushes insulate the different metals and provide hard wearing and long lasting bearings. They meet the requirements of the NZ Building Code B 1 when used in accordance with the recommendations of Joinery Developments Ltd.

Durability

Meets the requirements of the NZ Building Code for a period of 10 years when used in accordance with the recommendations of Joinery Developments Ltd.

Corrosion Resistance

Resists corrosion in normal environmental use. Aluminium parts are either etched and anodised natural or chromate conversion coated and powdercoat protected.

Installation Requirements

For exterior application stainless steel screws must be used. We recommend 10 gauge truncated screws which are available ex stock. In high load situations the top and bottom hinges should be placed as far apart as practical. The cavity between the door frame and hinge style must be kept clear of obstructions at all times. The hinges require a clearance between the frame and the panel of 4.5mm. The tapered hinge leaf design eliminates the need to relieve the hinging edge of the door panel. The Quick Fix Heavy Duty hinge must be used in conjunction with top hung door closers.

Performance Testing

The Quick Fix hinge has been tested for load carrying capacity by Material Testing Laboratory of Ellerslie, Auckland and the subsequent allowable door weights calculated by Abbott & Associated, Consulting Engineers of Mission Bay, Auckland.

Maintenance requirements

Occasional cleaning with water is recommended. Avoid the use of acidic, alkaline or abrasive cleaners. Avoid strong solvent type cleaners on powdercoated finish. If a solvent cleaner is required use methylated spirits or mineral turpentine. Ensure contact is minimal and thoroughly rinsed from the surface. Corrosive deposits such as salt or contaminates should be washed off regularly in the case of environmental contamination or immediately following severe accidental contamination. Cavities between the door frame and door panel must be kept clear of obstructions. Hinge pins should be checked for movement occasionally and reported to the supplier if excessive movement is noticed.

Ordering & Pricing

Please contact Joinery Developments for a quote on your requirements. Call us now on +64 9 443 0038 or view our contact page for full contact details.