Commercial Interior Partitioning Doors.
- 3mm Tapered Leaf Hinge
- Eliminates rebating of doors and jambs
- Pre-drilled and countersunk
- Offset knuckle, raised to allow flexibility of hinge position on door jamb
- Designed, manufactured and tested in New Zealand
Available in the following finish types:
Materials of Construction
Hinge extrusion – Aluminium alloy 6261 T5
Bushes & end caps – Nylon 66
Pin – 3/16″ stainless steel 303
Aluminium extrusion and stainless steel pins have been used for their strength and corrosive resistance. Nylon bushes insulate the different metals and provide hard wearing and long lasting bearings. They meet the requirements of the NZ Building Code B 1 when used in accordance with the recommendations of Joinery Developments Ltd.
Meets the requirements of the NZ Building Code for a period of 10 years when used in accordance with the recommendations of Joinery Developments Ltd.
Resists corrosion in normal environmental use. Aluminium parts are either etched and anodised natural or chromate conversion coated and powdercoat protected.
For exterior application stainless steel screws must be used. We recommend 10 gauge truncated screws which are available ex stock. In high load situations the top and bottom hinges should be placed as far apart as practical. The cavity between the door frame and hinge style must be kept clear of obstructions at all times. The hinges require a clearance between the frame and the panel of 4.5mm. The tapered hinge leaf design eliminates the need to relieve the hinging edge of the door panel. The Quick Fix Heavy Duty hinge must be used in conjunction with top hung door closers.
The QFI hinge has been tested in-house.
Occasional cleaning with water is recommended. Avoid the use of acidic, alkaline or abrasive cleaners. Avoid strong solvent type cleaners on powdercoated finish. If a solvent cleaner is required use methylated spirits or mineral turpentine. Ensure contact is minimal and thoroughly rinsed from the surface. Corrosive deposits such as salt or contaminates should be washed off regularly in the case of environmental contamination or immediately following severe accidental contamination. Cavities between the door frame and door panel must be kept clear of obstructions. Hinge pins should be checked for movement occasionally and reported to the supplier if excessive movement is noticed.
Ordering & Pricing
Please contact Joinery Developments for a quote on your requirements. Call us now on +64 9 443 0038 or view our contact page for full contact details.