Typical Applications
Commercial Interior Partitioning Doors.
Features
- 3mm Tapered Leaf Hinge
- Eliminates rebating of doors and jambs
- Offset knuckle, raised to allow flexibility of hinge position on door jamb
- Pre-drilled and countersunk
- Designed, manufactured and tested in New Zealand
Pack Size
12 Hinges
Finishes
Available in the following finish types:
QFI Hinge Black Powder Coated
21003
QFI Hinge White Powder Coated
21004
QFI Hinge Silver Anodised
21005
QFI Hinge Custom colour
21008
Hinge extrusion – Aluminium alloy 6261 T5 Bushes & end caps – Nylon 66 Pin – 3/16″ stainless steel 303
Aluminium extrusion has been used for its strength and corrosive resistance. Nylon bushes insulate the different metals and provide hard wearing and long lasting bearings. They meet the requirements of the NZ Building Code B 1 when used in accordance with the recommendations of Joinery Developments Ltd.
Meets the requirements of the NZ Building Code for a period of 10 years when used in accordance with the recommendations of Joinery Developments Ltd.
Resists corrosion in normal environmental use. Aluminium parts are either etched and anodised natural or chromate conversion coated and powdercoat protected.
For exterior application stainless steel screws must be used. We recommend 10 gauge truncated screws which are available ex stock. In high load situations the top and bottom hinges should be placed as far apart as practical. The cavity between the door frame and hinge style must be kept clear of obstructions at all times. The hinges require a clearance between the frame and the panel of 4.5mm. The tapered hinge leaf design eliminates the need to relieve the hinging edge of the door panel. The Quick Fix Heavy Duty hinge must be used in conjunction with top hung door closers.
The QFI hinge has been tested in-house.
Occasional cleaning with water is recommended. Avoid the use of acidic, alkaline or abrasive cleaners. Avoid strong solvent type cleaners on powdercoated finish. If a solvent cleaner is required use methylated spirits or mineral turpentine. Ensure contact is minimal and thoroughly rinsed from the surface. Corrosive deposits such as salt or contaminates should be washed off regularly in the case of environmental contamination or immediately following severe accidental contamination. Cavities between the door frame and door panel must be kept clear of obstructions. Hinge pins should be checked for movement occasionally and reported to the supplier if excessive movement is noticed.
Please contact Joinery Developments for a quote on your requirements. Call us now on +64 9 443 0038 or view our contact page for full contact details.